In case the lens is a cheap kit lens like the AF-S DX 18-55, it is likely not worth the trouble to repair, since such a lens can be bought new for about 100 bucks - or you might take the opportunity to upgrade to a better quality lens. If autofocus does not work even with a different lens, there's no easy fix - the problem is almost certainly

1 Answer. No, there is nothing you can do. Nikon's AF-P lenses do not work with the D5100. At the time of release of the first AF-P lenses (the 18–55mm, both with and without VR), the only cameras that supported AF-P lenses were D5300 and D5500, and a firmware update was made available to the D3300 so it would support AF-P lenses as well.

The 55-250mm AF-S has an A/M focus switch, which has to be set to A. If you've done this, and the lens still isn't working, Nikon can answer your questions better than we can. If your lens is AF, rather than AF-S, it has no built-in motor, and therefore Can't autofocus on a D40, D80, or any of the D3xxx and D5xxx series.
Nikon D5200 and 35mm f/1.8 DX (body weighs 19.6 oz./555 g with battery and card, about $800, or $900 with 18-55mm lens). enlarge . My biggest source of support is when you use any of these links , especially this link directly to it at Adorama or directly to it at Amazon , when you get anything , regardless of the country in which you live. Autofocus worked fine until recently, so I had to finally read the manual. I found the A/M switch on the lens and set it to A. I believe it had been switched to M, somehow. No help. After much experimenting, I found that in viewfinder mode the lens will not autofocus, but in Live view mode, it will autofocus. So the lens motor and contacts must
In this in-depth field review, we will look at the Nikkor 18-55mm f/3.5-5.6G AF-P VR, the latest Nikon basic DX standard kit lens launched in September 2016. It is an all-plastic lens featuring the newest stepping motor, which focuses faster and quieter than the traditional silent wave motor used on most standard Nikon lenses.
Set the lens and camera to manual focusing. First, move the focus-method switch on the lens to the manual position. The setting is usually marked M or MF. Next, you need to set the camera to manual focusing by setting the Focus mode to MF. (Get the job done via the Information display control strip.)
k90S.
  • 0fmuugdu7s.pages.dev/210
  • 0fmuugdu7s.pages.dev/740
  • 0fmuugdu7s.pages.dev/328
  • 0fmuugdu7s.pages.dev/765
  • 0fmuugdu7s.pages.dev/473
  • 0fmuugdu7s.pages.dev/428
  • 0fmuugdu7s.pages.dev/561
  • 0fmuugdu7s.pages.dev/330
  • 0fmuugdu7s.pages.dev/432
  • 0fmuugdu7s.pages.dev/349
  • 0fmuugdu7s.pages.dev/793
  • 0fmuugdu7s.pages.dev/167
  • 0fmuugdu7s.pages.dev/587
  • 0fmuugdu7s.pages.dev/468
  • 0fmuugdu7s.pages.dev/558

    • nikon 18 55mm lens autofocus not working